Dallas Fence Service

Security Fencing in Dallas, TX

Commercial security fencing in Dallas, TX. Anti-climb 358 mesh, palisade, K-rated, and access-controlled perimeters. Free site assessment: (469) 809-2424.

Get a Free Estimate Call (469) 809-2424

On-site estimates
Written 5-year workmanship warranty
Serving Dallas since 2008

Commercial security fencing in Dallas, TX

Dallas, Texas 32.99° N / 96.84° W

Dallas BasedDallas, TX
Built for Clay SoilSteel-post options
Written Coverage5-year workmanship warranty
Clear ScopeMeasured, itemized estimates

01
Measure the Property

Footage, grade, access, removals, gates, and obstructions are reviewed before the scope is written.
02
Specify the System

Material, posts, hardware, finish, and details are matched to the way your security fencing needs to perform.
03
Confirm the Scope

The proposed work is documented so the estimate is useful and the installation crew knows what was agreed.

Security Fencing in Dallas

Materials, options, and build details that matter.

Review the specifications, design choices, site conditions, and installation decisions behind a durable security fencing.

01Build specification

High-Security Perimeter Fencing for Dallas Facilities

A commercial perimeter has one job: control who gets in, slow down anyone who shouldn't, and give your cameras and staff time to respond. Dallas Fence builds security fencing for warehouses, dealerships, utility yards, data centers, schools, and multifamily communities across the DFW metroplex, from a single reinforced chain-link run to full anti-climb and access-controlled perimeters.

We work the way facility managers and general contractors need us to: real specs, a clear scope up front, permits pulled, and a schedule that holds. Every commercial install is backed by our 5-year workmanship warranty.

Commercial chain link used in security fencing planning — Commercial chain linkMaterial and site conditions shape the final scope.

What Separates a Real Security Fence

A boundary fence marks a line. A security fence resists a determined attempt to cross it. The difference comes down to a few things we spec deliberately on every job:

Anti-climb geometry — Mesh apertures too tight for a foothold, pales too narrow to grip, and toppings angled outward so a climber has nowhere to pull from.
Heavier gauge and thicker sections — Industrial wire gauges and structural posts that shrug off cutting, prying, and vehicle contact far better than residential-grade material.
Deeper, stronger footings — Concrete-set posts sized for the panel weight and for North Texas wind load, so the line stays plumb and rigid under pressure.
Integrated access control — Automated gates, readers, and sensors tied to the fence line so the perimeter is one system, not a fence with a lock bolted on.

Call (469) 809-2424 for a site assessment and we'll walk the property, flag the weak points, and spec a system to your threat level.

02Build specification

Security Fence Systems We Install

Different sites need different barriers. We install the full range, from no-frills deterrents to maximum-security perimeters, and we'll tell you straight which class actually fits your risk profile instead of overselling.

Anti-Climb 358 Welded Mesh

The benchmark for high-security perimeters. The dense 3in x 0.5in aperture pattern gives no finger or toe hold and leaves no room to insert bolt cutters or manual tools. It's the go-to for substations, data centers, water treatment, and critical infrastructure where a breach is a serious event.

Effectively unclimbable and cut-resistant
Near-total see-through for camera coverage
Available to 8ft and taller with toppings where permitted

Steel Palisade

Heavy galvanized steel pales with splayed, triple-point, or rounded tops form an aggressive, obviously hostile barrier. The vertical profile is hard to scale and impossible to hide behind, which is why it's a favorite for industrial yards, equipment storage, and secure compounds.

Pointed anti-climb tops
High visibility for surveillance and patrol
Rigid, bolt-through construction that resists prying

High-Security Chain Link

The workhorse of commercial perimeters, done right. Heavy-gauge chain link in a smaller mesh, on schedule-40 posts, topped with a 45-degree barbed-wire outrigger or razor tape where zoning allows. It covers long runs efficiently and installs fast.

Efficient coverage for large sites
Barbed or razor toppings for added deterrence
Small-mesh and privacy-slat options available

We break down the tiers, gauges, and mesh sizes in more depth on our chain-link fence installation page.

Ornamental Steel (Anti-Climb Profile)

Security that doesn't read as industrial. Welded steel picket fencing in an anti-climb rail configuration delivers real strength and a professional face for corporate campuses, medical offices, and gated multifamily entrances. Pairs cleanly with our iron and ornamental fence installation work when the look matters as much as the barrier.

Corporate and campus-grade appearance
Concealed-fastener, anti-climb rail spacing
Powder-coat finishes that hold up in Texas sun

Crash-Rated and Anti-Ram Barriers

For facilities that need to stop a vehicle, not just a person. Bollards, cabled fence lines, and K-rated (M30/M50) barriers protect entrances, loading areas, and standoff zones at government buildings, fuel depots, and high-value targets.

Vehicle intrusion and anti-ram protection
K-rated / ASTM-rated options
Engineered to the standoff distance you need

Electric and Monitored Security Fence

A monitored electric perimeter adds an active layer on top of the physical barrier. Tamper and breach detection ties into your alarm and camera system and puts eyes on the fence line the instant someone tests it. Common as a second ring inside a primary fence at high-risk sites.

Active deterrent plus intrusion detection
Zoned alarm and camera integration
Non-conductive, bonded, and grounded builds where required

03Build specification

Which Security Level Fits Your Facility

Over-spec a low-risk site and you over-build for no gain; under-spec a real target and the fence is theater. We size the system to the asset and the threat. Here's how facility types typically map to the right class of perimeter.

Facility type	Primary risk	Recommended system
Warehouse / distribution	Theft, trespass, loitering	Heavy-gauge chain link with barbed topping, automated cantilever gate
Auto / equipment dealership	After-hours inventory theft	8ft chain link or palisade, camera-friendly, secured slide gates
Utility yard / substation	Copper theft, sabotage, critical outage	358 anti-climb mesh, non-conductive build, monitored access
Data center / telecom	Physical breach, tampering	358 mesh primary line, electric or sensored second ring, K-rated entry
School / campus	Access control, student safety	Ornamental anti-climb steel, controlled entry points, welcoming face
Multifamily community	Perimeter control, resident safety	Ornamental steel with automated entry gates and reader access
Government / high-value	Vehicle attack, forced entry	K-rated / anti-ram barriers, standoff bollards, layered detection

Use this as a starting point, not a verdict. Insurance requirements, local crime patterns, and your own security protocols shift the answer. We'll factor all of it into the assessment.

Automatic gate system used in security fencing planning — Automatic gate systemMaterial and site conditions shape the final scope.

04Build specification

Access Control and Gate Automation Integration

A perimeter is only as strong as its gates, and a manual gate people prop open is a hole in your security. We build the fence and the entry as one system and tie it into your access control so the line actually stays closed.

We install cantilever slide, V-track slide, and swing gates sized for your traffic and vehicle mix, driven by commercial-grade operators. On the control side we integrate keypads, card and fob readers, loop detectors for auto-open and safety, telephone entry, and timers, and we can hook new gates into an existing access system or stand one up from scratch.

For the full breakdown of operators, loop layouts, safety devices, and control options, see our automatic gate installation and repair services. If you already run an access platform, tell us the make and we'll spec compatible hardware from the start.

05Build specification

Security Fencing by Industry

Different sectors face different threats and different rules. We've built perimeters across DFW for each of these and design to the specific risk profile.

Board-on-board cedar used in security fencing planning — Board-on-board cedarMaterial and site conditions shape the final scope.

Warehouses and Distribution

Long perimeters, high-value inventory, and around-the-clock truck traffic. We spec heavy-gauge chain link or palisade with automated slide gates and camera-friendly clear zones, so theft is deterred and loading stays efficient. Distribution corridors run heavy through Garland and Irving, and we work both.

Utilities, Substations, and Data Centers

Critical infrastructure gets the top tier: 358 anti-climb mesh, non-conductive and properly grounded builds near energized equipment, monitored access, and often a second detection ring. Copper theft and sabotage are the live threats here, and the fence has to buy response time.

Auto Dealerships and Equipment Yards

Rows of inventory sitting outside overnight need a real barrier and clean sightlines for cameras. Tall chain link or palisade with secured, automated gates keeps stock in and after-hours prowlers out without hiding the lot from the street.

Schools, Campuses, and Institutions

Security has to coexist with an open, welcoming feel and clean pedestrian flow. Ornamental anti-climb steel with controlled entry points does both, defining the perimeter and channeling access without turning a campus into a compound.

Multifamily and Corporate Campuses

Gated communities and office parks along the Addison and Carrollton corridors want controlled access plus curb appeal. Ornamental steel with automated resident and visitor gates handles both. We serve commercial clients across Irving, Garland, Carrollton, and Addison.

06Build specification

Permits, Height Limits, and Wind Load in DFW

Commercial fencing in the Dallas area comes with real code and engineering considerations, and getting them wrong means red-tags and rework. We handle this so you don't have to.

Permits. Most DFW municipalities require a permit for commercial and industrial fencing, and taller or wind-rated runs often need engineered, stamped drawings. We pull the permits and manage inspections as part of the scope.

Height limits. Commercial and industrial zoning is generally more permissive than the tighter residential caps, and taller runs are often possible with a permit or variance. Barbed or razor toppings can add effective height where zoning allows. We verify limits for your specific parcel before we finalize the design.

Wind load. North Texas gets serious wind, and solid-face or tall fencing catches it. Panels, post sizing, and footing depth have to be engineered for the load, especially on palisade, privacy-slatted, or louvered runs. We build to spec so the line holds through storm season.

Maintenance. Galvanized and powder-coated steel systems need little beyond periodic inspection and gate hardware service. Electric and monitored perimeters need scheduled testing of controllers, sensors, and tamper circuits to stay reliable. We can set up a maintenance interval that keeps the whole system dependable.

Ready to lock down your facility? Call Dallas Fence at (469) 809-2424 or request a free estimate. We'll assess the site, spec the right system, and back the work with our 5-year workmanship warranty.

Where we work

Security Fencing across the DFW metroplex

Explore every city and neighborhood guide in our current service area — outside this list? Ask about your address .

Explore our other fence services

One crew for every fence on your property. Whatever you're building next, we install it.

Before You Build

Security Fencing questions

Practical answers about planning security fencing in Dallas.

What are the best anti-climb options?

358 welded mesh (3in x 0.5in apertures) blocks fingerholds and cut tools; steel palisade with splayed or triple-point tops and outward-curved toppings are the strongest deterrents for high-risk sites.

How tall can a commercial security fence be in Dallas?

Commercial and industrial zoning in the Dallas area is generally more permissive on height than residential lots, and taller runs are often possible with a permit or variance. Barbed or razor wire toppings can add height where zoning allows; we confirm limits before we finalize the design.

Can you integrate access control and automated gates?

Yes. We install cantilever slide, V-track, and swing gates with keypads, card readers, key fobs, loop detectors, and telephone entry, tied into your existing access control or a new system.

What are typical lead times for a commercial project?

Standard chain link and ornamental steel usually run 2 to 4 weeks; 358 mesh, palisade, K-rated barriers, and long automated-gate runs can take 4 to 8 weeks depending on material availability and permitting.

Do commercial security fences need a permit?

Most Dallas-area municipalities require a permit for commercial fencing, and some need engineered drawings for tall or wind-rated runs. We pull permits and handle inspections as part of the job.

How much maintenance does a security fence need?

Galvanized and powder-coated steel need little beyond periodic inspection and gate hardware service; electric and monitored systems need scheduled testing of controllers, sensors, and tampers.

What warranty do you offer on security fencing?

Every commercial installation is backed by our 5-year workmanship warranty, in addition to the manufacturer warranties on coatings, mesh, and gate operators.

Free Fence Estimate

Price your security fencing on the actual site.

Start with a free on-site measure and a written scope. You will know what is proposed before installation is scheduled.

Request My On-Site Estimate Call (469) 809-2424