Iron fence installation in Dallas, TX at $20 to $90 per linear foot: powder-coated steel panels or hand-welded wrought iron painted on site.
Iron fence installation in Dallas comes in two builds. Ornamental iron is pre-made steel panels, pre-galvanized and powder-coated at the factory; it is our typical pool and yard fence. Wrought iron is hand-welded to fit the property and painted on site, mostly for security and estate work. Installed, our iron and steel fences run $20 to $90 per linear foot.
| Spec | Typical choice |
|---|---|
| Price | $20 to $90 per linear foot installed |
| Material | Powder-coated steel panels or hand-welded wrought iron |
| Posts | Steel posts in concrete footings; heavier footings at gates |
| Common heights | 4 to 6 ft; up to 8 ft available |
| Styles | Flat-top, spear-top, ornamental, puppy panel, anti-climb |
| Gates | Walk gates and swing or slide drive gates, automation-ready |
We are a Dallas fence company based in North Dallas, with 200+ projects completed across Dallas–Fort Worth. Our fence professionals bring 10+ years of fence experience to iron jobs in Dallas, Collin and Denton counties. Estimates are free, on site and written, and qualifying residential installations carry our 5-year workmanship warranty.
Pricing starts with the actual property conditions—not a generic per-foot promise.
We are registered as a fence contractor with every city we serve and pull the permit when your job needs one.
Most installs start within days of the approved estimate and take 1 to 5 days, with a direct line to the team handling your job.
Qualifying residential installations include our published 5-year workmanship warranty.
Footage, grade, access, removals, gates, and obstructions are reviewed before the scope is written.
Material, posts, hardware, finish, and details are matched to the property and how the fence or gate will be used.
The proposed work is documented so the estimate is useful and the crew knows what was agreed.
North Dallas, Dallas, TX
A wrought iron fence we're really proud of: hand-welded and painted on site in North Dallas, with spear finials and a decorative ring band. Sturdy and elegant.
Dallas, TX
More than 250 linear feet of black powder-coated ornamental steel around a Dallas pool: pre-galvanized panels, 2x2 square posts and pool-code-compliant gates.
We serve Dallas and the surrounding DFW cities from our North Dallas office. Pick your city for its local fence rules and permit details.
We install both builds, and they sit at opposite ends of our price range.
| Ornamental iron (steel panels) | Wrought iron (hand-welded) | |
|---|---|---|
| How it's built | Pre-made panels bolted to steel posts | Fabricated and welded to fit the site |
| Finish | Pre-galvanized, then factory powder-coated | Primed and painted on site after welding |
| Typical use | Pool enclosures, yards, front-yard boundaries | Security, estate entrances, curved or custom runs |
| Details | Flat-top or spear-top panels in stock heights | Finials, rings, scrollwork, custom heights and arches |
| Price | Low end of our range | High end; decorative elements add to it |
From our own work:
At the free on-site visit we walk the line, mark the gates and check grade and access. Posts go in concrete footings sized for Dallas clay, heavier at gates. Dallas caps most residential front-yard fences at 4 feet, and a fence around a pool must meet the rules on our pool fence installation page. We are registered as a fence contractor with the city and pull the permit when your job needs one; see the Dallas fence permit guide. Most installs start within days of the approved estimate and take 1 to 5 days, depending on size. A permit or HOA approval, where needed, comes first.
Your written estimate spells out what moves the price within $20 to $90 per linear foot:
Bent section, sagging gate or surface rust? Start with fence repair. For a new fence, call (469) 809-2424 or request a free fence estimate.
Practical answers about planning iron fence installation in Dallas.
Installed prices run $20 to $90 per linear foot. Powder-coated steel panels sit at the low end; hand-welded wrought iron with finials and decorative elements sits at the high end. Footage, height, gates, slope, old-fence removal and access move the number.
Yes. We are registered as a fence contractor with the city and pull the permit when your iron fence needs one. We also prepare what your HOA asks for; the approval itself stays with the HOA.
Most installs start within days of the approved estimate, and most jobs take 1 to 5 days to install, depending on size. If a permit or HOA approval is needed, that comes first.
Qualifying residential installations carry our 5-year workmanship warranty. For upkeep, rinse the fence a couple of times a year and touch up chips, cut ends and weld points, since that is where rust starts.
Yes. Walk and drive gates are built to the same picket spacing, finial style and color as the fence, and we can match new sections or gates to existing ironwork. Gate openers are handled by our automatic gate team.
10+ years of fence experience
Start with a free on-site measure and a written scope. You will know what is proposed before any work is scheduled.
